Fit decides this, not features. The Maxis and the Omni Pro run the same Bionic FlexFit platform; the Maxis builds it bigger — 178–200 cm and 181 kg against the Pro's 153–186 cm and 136 kg. Under 178 cm, buy the Omni Pro today. Taller or heavier, wait.
The fresh part, as of late July 2026: as the official authorised LiberNovo dealer for Australia and New Zealand, we can confirm our first Australian Maxis allocation is locked in and lands between 18 September and 3 October 2026. The exact day goes up on the Maxis product page the moment freight confirms it. No other Australian retailer lists the chair; LiberNovo's dealer directory shows no Australian entries. Meanwhile the Omni Pro sits on our floor at $1,669–1,899.
What the Maxis and Omni Pro share
Same bones. Both run LiberNovo's Bionic FlexFit Backrest (eight flexible panels, sixteen pivot points), the Dynamic Support System linking seat, backrest and armrests, the 105°–160° five-stage recline architecture, an aluminium alloy base, and identical cover: five-year frame, two-year electronics, and a 7-day free trial when you buy from us. Our 30-day Omni review covers daily-use behaviour, and our Maxis preview carries the full spec sheet and configuration table — this article is only about the decision.
The differences that matter
Every figure below is from LiberNovo's official specs, trimmed to the differences.
| Specification | LiberNovo Maxis | LiberNovo Omni Pro |
|---|---|---|
| Recommended height | 178–200 cm (5′10″–6′7″) | 153–186 cm on the US spec; 158–190 cm on LiberNovo's Japanese site |
| Maximum user weight | 181 kg (399 lb), BIFMA-certified | 136 kg (300 lb) per BIFMA; 110 kg under EN 1335 |
| Seat depth | 52 cm, one extended size | 45 cm or 48 cm, chosen at purchase |
| Armrest width range | 39.9–59.9 cm | 30–50 cm |
| Recline | Five positions, 105°–160°; the 160° stage is Recovery Mode | Five positions, 105°–160°; the 160° stage is Spine Flow |
| Configurations | Manual, Electric or Airflow — lumbar motor, OmniStretch and ventilation added tier by tier | One configuration — motorised lumbar, OmniStretch and Active AirFlow all standard |
| Seat cooling | Active AirFlow on the Airflow build only | Standard — 4,000 RPM centrifugal fan, two speeds |
| Upholstery | Micro-elastic stretch fabric on Manual and Electric; Gabriel Atlantic on Airflow | Gabriel Atlantic on every chair, 110,000 Martindale cycles |
| Warranty | 5-year frame, 2-year electronics, 7-day free trial | 5-year frame, 2-year electronics, 7-day free trial |
The first four rows are the whole comparison. Recline, stretch function, backrest behaviour — near identical. What you are choosing is a size and a load rating.
The size question is the whole question
The mistake we watch weekly in the showrooms: choosing on feature lists when the real question is whether the chair fits you. Our counter rule: under 178 cm the Maxis was never your chair, and over 186 cm — or above 136 kg — the Omni Pro never was. The 178–186 cm band is the only genuine decision zone, where weight and thigh length make the call.
The reviewer record backs the cutoff harder than the spec sheet. A 188 cm Omni owner reported the seat depth fell well short and warns buyers much over 178 cm off the standard sizing; BTOD's independent testing found the same pans unsuitable much past 188 cm; Notebookcheck measured 6–8 cm of unsupported thigh on the 48 cm seat under a 170 cm reviewer. The Omni Pro uses those same 45 and 48 cm pans. The Maxis answers with a single 52 cm pan and a backrest that widens to 52.1 cm at the waist.
Weight is the quieter axis and the more decisive one. Published seating guidance says to pick a rating about 25 per cent above your body weight, because sitting is a dynamic load: you drop in, lean, push off the armrests. Run that rule backwards from the Omni Pro's 136 kg and the comfortable ceiling lands just under 110 kg of sitter — right where the stricter European EN 1335 test rates the same chair. As one big-and-tall forum poster put it, most chairs in this category fit “one or the other, not both” — height or weight. The Maxis, rated to 181 kg across a 178–200 cm range, is built precisely for people who are both.
Buy now or wait
Buy the Omni Pro today if...
- You measure 153–186 cm and sit comfortably under the 136 kg rating — which covers most of the people we fit in our showrooms.
- You want the full stack standard rather than tiered — motorised lumbar, OmniStretch and Active AirFlow on every chair.
- You need a chair now, tested with your own back. The Omni Pro is in stock at $1,669–1,899 and on the floor at both showrooms.
Wait for the Maxis if...
- You are over 186 cm. Nothing in the Omni line is specced for you, and force-fitting is how tall buyers end up with a backrest at mid-shoulder and a headrest touching air.
- You are above 136 kg, or close enough that the margin bothers you. The Maxis is BIFMA-tested at 181 kg with a TÜV-certified Class 4 gas lift run through 20,000 cycles — relevant, because a sinking cylinder is the classic heavy-user failure.
- You are 178–186 cm with long femurs and every 48 cm pan you have tried leaves your thighs hanging. The 52 cm pan is the fix; one shipment's wait beats years in the wrong chair.
Consider the Omni or Omni SE if...
- The Pro stack is more than you need. The standard Omni ($1,349–1,699) keeps the electric lumbar and OmniStretch, drops the seat fan and the fifth recline position, and comes in Midnight Black, Space Grey or Moss Green.
- You want the platform at entry money — the manual-adjust Omni SE is $1,299.
- Our Omni vs SE vs Pro comparison argues the three trims properly.
The honest risks, both directions
Waiting carries real ones. The Maxis has no retail owner base anywhere yet — global pre-order units are estimated to ship by mid-August 2026 — so every published verdict comes from pre-production units, and much of the launch press was paid placement. The first genuine hands-on, sponsored but disclosed and editorially independent, praised the seat, recline and armrest padding while flagging a motorised lumbar that presses high with no angle adjustment and a tilt limiter with no position lock. Note the warranty split too: the motors, fan and battery doing the novel work carry the shorter two-year cover. Our plan for the first shipment: display units on both showroom floors before anyone commits.
Brand history deserves a straight sentence. LiberNovo's Trustpilot score sits at 3.0 from 135 reviews — 31 per cent five-star, 39 per cent one-star — and the pattern is consistent: comfort praised, complaints about direct-from-factory shipping delays and order communication rather than the chairs. Buying locally removes exactly that failure mode: an Australian retailer, Australian consumer guarantees, chairs already in the country.
Buying today has its own risk: the Omni Pro is cut for average-to-tall frames, not big ones. Reviews of the sibling Omni called out armrests that shift under sideways force and a recline that drops back hard with no lock between stages — hardware the Pro shares. None of it matters much at 170 cm and average weight. Near the 186 cm or 130 kg ceilings, sit in one before paying.
A note for Aeron cross-shoppers
Tall buyers often weigh the Maxis against the Herman Miller Aeron in Size C. We carry it as authorised, 100 per cent genuine stock at $1,869–2,364. Mind the ratings fine print: Herman Miller's US guide lists Size C at 181 kg (400 lb) for sitters 178–198 cm, while Australian retailer materials still state 159 kg for Sizes B and C. If you are heavy enough for this paragraph to matter, that gap decides it — the Maxis's 181 kg BIFMA certification is unambiguous. Our Aeron size guide covers A/B/C sizing; the Aeron's standard warranty is one year, with a 12-year upgrade at $220.
The Australian timeline
- 12–13 May 2026 — Maxis pre-orders open in the US and Europe.
- 16 June 2026 — official global launch.
- By 15 August 2026 — LiberNovo's own store lists pre-order units shipping.
- 18 September – 3 October 2026 — the window our first Australian allocation lands in, confirmed late July. No orders or deposits yet; the exact day goes up on the Maxis product page the moment it is locked.
To hear the day it becomes orderable, register your interest and we will email you directly.
FAQ
Is LiberNovo a good brand?
Young and polarised: Trustpilot shows 3.0 from 135 reviews — comfort and the seat fan earn genuine praise, complaints centre on slow direct shipping and order communication. Buying in-country authorised stock, with a showroom sit-test first, removes the part people actually complain about.
What is the weight limit of the LiberNovo Maxis?
181 kg (399 lb), BIFMA-certified at that load, on a TÜV-certified Class 4 gas lift tested through 20,000 cycles. The Omni Pro, for comparison, is rated 136 kg under BIFMA and 110 kg under the European EN 1335 standard.
When will the LiberNovo Maxis be available in Australia?
The global launch was 16 June 2026. Our first Australian allocation is confirmed and lands between 18 September and 3 October 2026; the exact day is still to be locked. Watch the Maxis product page, or register your interest and we will email you.
What is the difference between the LiberNovo Omni and Omni Pro?
The Omni Pro adds Active AirFlow seat ventilation, a fifth recline position, a longer-travel neckrest, Gabriel Atlantic upholstery and the Graphite or Glacier colourway. Both keep the electric lumbar, OmniStretch and Bionic FlexFit backrest. Our Omni vs SE vs Pro guide has the detail.
Is the LiberNovo Omni Pro worth it?
For sitters 153–186 cm and comfortably under 136 kg, it is the strongest chair in the line — the full stack standard, in stock at $1,669–1,899, testable in both showrooms. Independent testing puts its seat comfort at the top of the price class. Over 186 cm, wait.
Can I pre-order the Maxis in Australia right now?
No. Nobody in Australia can sell you a Maxis today, us included. Follow the product page, register through our contact form, and sit-test the related Omni platform in Sydney or Melbourne in the meantime.
Sit-test the platform this week
The fastest way to settle buy-versus-wait is a chair with your own weight in it. Both showrooms — Unit 11, 46-50 Wellington Rd, South Granville NSW 2142 in Sydney, and Shop 1a/280 Whitehorse Rd, Nunawading VIC 3131 in Melbourne — have the LiberNovo Omni platform on the floor now. Give it twenty minutes. If it fits, the Omni Pro goes home with you, delivered anywhere in Australia or New Zealand. If your knees hang past the pan or the ratings read thin, follow the Maxis product page and register your interest — we will contact you when stock arrives.